Modeling the relationship between the hardness and wear resistance of materials during their comparative testing by the “block-on-ring” method
Annotation
The authors propose a novel model accounting for the hardness of materials in a simplified algorithm in order to evaluate their wear resistance by the “block-on-ring” method during tests on a friction machine. This work is relevant for the study of the factors influencing wear and continues to improve this method based on the Taylor series and the testing results for a number of materials in a wide range of hardness. The problem is solved by correlation analysis of the dependence of the hardness of materials on the Mohs scale on the experimental wear parameters, including the volumetric wear resistance of these materials. A complete software that has been developed implements a simplified version of the “block-on-ring” method for wear testing of materials, taking into account their hardness. The high correctness and efficiency of the proposed model is confirmed by the increasing hardness of a polytetrafluoroethylene composite filled with ultrafine diamond. Practical significance. The model of the relationship between the wear resistance and the hardness of materials proposed and justified in the paper is ready for use in their tests by the “block-on-ring” method in production conditions.
Keywords
Постоянный URL
Articles in current issue
- Designing a side-emitting lens usingthe composing method
- Laser multiparameter method for incoming inspection of the mounting elements used in the volume of sealed neodymium laser emitters
- Adaptive anti-thermal imaging protection for moving objects
- The parametric convergence performance improvement in the direct adaptive multi-sinusoidal disturbance compensation problem
- The modal sensitivity, robustness and roughness of dynamic systems(review article)
- Numerical simulation of functional characteristics of solar elements InGaAsN/Si
- Solgel synthesis of Gd2O3:Nd3+ nanopowders and the study of their luminescent properties
- Detection of a small target object in blurry images affected by affine distortions
- An information system for spatial visualization of prognostic and retrospective data on the probability of observing auroras
- Applying bagging in finding network traffic anomalies
- An analysis of the ways to reduce the vulnerability of networks based on the sequential removal of key elements
- The robust distributed ledger model for a multidimensional blockchain security analysis
- Building knowledge graphs of regulatory documentation based on semantic modeling and automatic term extraction
- Influence of the temperature factor on the deformation properties of polymer filaments and films
- A one-step optimization method for a compressor wheel of a microturbine engine
- The influence of viscosity and turbulence on the supersonic flow compression and expansion corner
- Application of a short-pulse ultra-wideband probing signal for estimating reflective characteristics